Grab your tape measure and measure the width (side-to-side) of your current vanity or the space you intend
to use. Measuring the width is key to determining how much physical and visual space your vanity will take
up in your bathroom. Keep in mind that vanity tops typically add ½ inch to 1 inch more on either side of the
cabinet width.
Tip: Building codes often require at least 15″ from the center of your toilet to any fixture. Check your
local code to be sure your new vanity meets all requirements.
Your custom made vanity top will include the necessary faucet holes, based on your selection. The number of
hole and their spread will depend upon the type of faucet you intend to install:
These cabinets do not come pre-assembled. They must be assembled at home.
866-373-9131
Single hole
4" Centerset
8" Wide Spread
